Bartlett Lifting Devices - Top-Frame Mounted 5th Wheels for Yard and Road Use

High-Lifting 5th Wheels For Trailer Dumping

Discontinued

High-Lifting 5th Wheel in Maximum Lift Position

Stabilizers for High-Lifting 5th Wheel models

Specifications: High-Lifting 5th Wheels For Trailer Dumping

Table I ST9 Starlift

Gross Weight Capacity¹(Lbs., Kg.) 80,000 36,288

Minimum Tractor² C. A. Dim³ (Ins., mm) 112 2845

Lifting Height⁴D (Ft., M.) 19.50 5.94

Down Height⁵ F (Ins., mm) 11 279

Dimensions (Ins., mm)

A. 11.25 286

B. 102 2591

C. 17 432

D. Lifting Height⁴(Ft., M.) 19.50 5.94

E. 74 1880

F.Down Height⁵ 10.50 267

G. 22 559

H. 18 457

I.Stabilizer to Tires 10 254

J. 112 2845

Dry Weight (Lbs., Kg.) 8400 3810

Stabilizer Weight(Lbs., Kg.) 1800 816

Installation Time w/ Stabilizers (Approx. Hrs.) 130

Parts Link

FOOTNOTES

Gross weight refers to trailer and contents.
Tandem required. Tilt cab not recommended.
C.A. refers to distance from last above-frame obstruction (i.e. transmission mount) behind tractor cab to center of tandem axles.
Litting height refers to distance from down height to maximum raised height.
Down height refers to distance from top of tractor frame to top of 5th wheel plate when unit is in down position.

Hydraulic Stabilizers. Required to stabilize tractor-trailer during dumping operation. Require 28" area ahead of front tandem wheel (10" ahead of front tandem tire, plus 18" area ahead must be free of any below-frame component such as air tank, battery box, brake system, etc.). Stabilizer housing is welded to reinforcing truss under tractor frame.

Controls. Operated from within cab after hook-up. Hydraulic controls for 5th wheel and stabilizers located in cab on passenger side. This requires removal of passenger seat.

King Pin Release. Pneumatic with cab control valve and safety lock, standard.

Hydraulic Cylinders. Main cylinders: Three-stage single acting telescopic. Slide cylinders, double-acting.

Fluid Type. Anti-wear hydraulic oil with pour-point rated according to operating temperatures and conditions. Not included with unit.

Pump. Balanced vane pump. Output at l200rpm: 22gpm at 100psi.

P.T.O. Ratio. Recommended 90-110%.

Complete Units. Units shipped complete except for hydraulic fluid and flat stock steel for installation. (Fluid and flat stock are supplied by local distributor).

Pick-Up Ramps. To meet varying tractor requirements, ramps are to be fabricated and fitted by installer. Instructions included with unit.

Installation. Units are installed at the factory, or by an authorized and qualified distributor. Tilt cab tractors not recommended.

Back to Trailer Dumping